Active Optical Components and Modules
Go!Foton offers a series of Avalanche Photodiodes for various applications.
Go!Foton offers an array of TAP Detectors for monitoring and control.
Go!Foton produces a series of transceiver modules for PON applications, video-related products for video-overlay PON (VPON) and supporting ICs.
The transceivers are designed for point-to-multipoint (P2MP) WDM single fiber configurations (PON). In general, 1.31, 1.55 and 1.49 μm wavelengths are used. In particular, in the upstream, the uniquely designed burst-mode (BM) transmitter in the ONU module and BM RX in the OLT module make the system design simpler and less costly. The modules are made of compact 2×5 or 2×6 small form factor (SFF) with a SM pigtail, SC receptacle or a small form pluggable (SFP) with SC receptacle, unless a custom feature is requested.
Go!Foton has developed devices for video-overlay applications including 3-wavelength video splitters and a compact / low-cost video receiver. These products are readily usable in conjunction with 3W-TRX™ equipped ONU modules.
This cable can be used as a replacement for a pair of coaxial cables. The BM-AOC is able to carry any data format, even single it communication.
4/6/8 Channel CWDM Line Combiner for GPON, GEPON & Turbo-EPON
Significantly extend the reach of your fiber connection.
Go!Foton provides Selguide®, a light source for image scanning, based on proprietary optical technology. It provides high intensity and uniform light emission with a smaller number of LED’s used to achieve low power consumption. It is the best choice available as a light source for contact images sensors. The color Selguide® ensures sharp, full color reproduction through sequential switching of ultra-high intensity LED chips in three primary colors.
Go!Foton fabricates unique test boards and designs and fabricates custom test boards.
This handheld tester was designed to offer complete utility for Installers, Network IT Personnel, and Customer Service Technicians. Any SFP device can be plugged into the Tester and Full Functionality can be verified as well as Wavelength and Power Measurements. The unit can also be used to Test the Optical Power and Identify Incoming Signals. The LCD Digital Read-Out displays all of the Key Parameters of the plugged SFP Transceiver in addition to individual LED’s which indicate individual ITU CWDM Wavelength information.